Analysis of the effectiveness of control measures to mitigate road dust emissions in a regional network

The effectiveness of control measures to reduce road dust emissions is analyzed using a year’s data of road dust emissions collected with a mobile sampling platform and a survey of road maintenance practices in the Lake Tahoe Basin of Nevada and California US. Attributes such as sweeping practices, anti-icing, shoulder improvement, pavement condition, trackout, and abrasive material from road segments were analyzed with a feature subset selection algorithm. Street sweeping was found to be an effective means of controlling dust emissions from roads. Road dust from dirty tertiary roads served as a continuous source of suspendable material for adjacent high-speed roads in the winter time. To be most effective, emission control strategies require that not only primary roads, but all roads be swept after snow storms to recover applied abrasive material.     

Delivering mobility as a service (MaaS) through a broker/aggregator business model

Transportation - Mobility as a service (MaaS) promises a bold new future where bundled public transport and shared mobility options (carsharing, ridesharing, bikesharing and microtransit) will...     

Influence of vehicle driving parameters on the noise caused by passenger cars in urban traffic

In this work, a sample of vehicles has been instrumented to measure of variables that influence vehicle noise emissions in Madrid. A circuit reproducing a normal travel pattern in large city is traveled by a fleet of vehicle models representing the fleets of cars in a European city. A sample of drivers covers the test track under different traffic conditions. Driving parameters and noise emitted have been recorded in each test and average values have been extracted. These data have been analyzed to define the noise emissions produced by a vehicle in real driving conditions and to identify the noisiest driving behaviors.     

CFD Analysis of Ship-to-Ship Hydrodynamic Interaction

A numerical study of ship-to-ship interaction forces is performed using a commercial CFD code, and the results are compared with experimental data and with the results of a panel method analysis. Two ship models have been used in the interaction forces analysis: a tug and a tanker, advancing parallel to each other with different lateral distances and two different values of the fluid depth. Computations are carried out with four different flow models: inviscid and viscous flow with the free surface modeled as a rigid wall and inviscid and viscous flow with the deformable free surface. A fair agreement was obtained with available experimental data and results obtained by panel method. The influence of viscosity in the computations is found to be comparatively weak, while the wavemaking effects may be important, at small magnitude of the horizontal clearance.     

Development of railway station choice models to improve the representation of station catchments in rail demand models

ABSTRACT

This paper describes the development of railway station choice models suitable for defining probabilistic station catchments. These catchments can then be incorporated into the aggregate demand models typically used to forecast demand for new rail stations. Revealed preference passenger survey data obtained from the Welsh and Scottish Governments was used for model calibration. Techniques were developed to identify trip origins and destinations from incomplete address information and to automatically validate reported trips. A bespoke trip planner was used to derive mode-specific station access variables and train leg measures. The results from a number of multinomial logit and random parameter (mixed) logit models are presented and their predictive performance assessed. The models were found to have substantially superior predictive accuracy compared to the base model (which assumes the nearest station has a probability of one), indicating that their incorporation into passenger demand forecasting methods has the potential to significantly improve model predictive performance.     

To kill a real option – Incomplete contracts,real options and PPP

This paper is concerned with the implications of public–private partnership agreements for the execution of expansion options in road infrastructure. More specifically, it analyzes the expansion of an existing two-lane road in Sweden, and examines the real options created by an intermediate type of road with three lanes. Interpreting the results from real option analysis in the light of incomplete contract theory, this paper finds that external congestion costs might necessitate public ownership to ensure a social optimal outcome in public–private partnerships.     

Biogeography-based combinatorial strategy for efficient autonomous underwater vehicle motion planning and task-time management

Autonomous Underwater Vehicles (AUVs) are capable of spending long periods of time for carrying out various underwater missions and marine tasks. In this paper, a novel conflict-free motion planning framework is introduced to enhance underwater vehicle’s mission performance by completing maximum number of highest priority tasks in a limited time through a large scale waypoint cluttered operating field, and ensuring safe deployment during the mission. The proposed combinatorial route-path planner model takes the advantages of the Biogeography-Based Optimization (BBO) algorithm toward satisfying objectives of both higher-lower level motion planners and guarantees maximization of the mission productivity for a single vehicle operation. The performance of the model is investigated under different scenarios including the particular cost constraints in time-varying operating fields. To show the reliability of the proposed model, performance of each motion planner assessed separately and then statistical analysis is undertaken to evaluate the total performance of the entire model. The simulation results indicate the stability of the contributed model and its feasible application for real experiments.     

Establishment of Community Managed Fisheries’ Closures in Kenya: Early Evolution of the Tengefu Movement

Community-based management (CBM) could be an essential tool to prevent the depletion of marine resources in the Western Indian Ocean region. In Kenya, political pressure to strengthen local governance, has led to adoption of CBM as a way of reducing over-exploitation and managing the competing uses and impacts on the marine environment. Several communities in Kenya have embraced CBM and have set aside or closed previously fished areas to enhance recovery of fisheries and biodiversity. These community fisheries closures (locally called tengefu), despite being degraded, may recover to finfish abundances and biodiversity levels similar to established MPAs or above thresholds for maintaining some ecological services. Communities see their direct involvement and control of these tengefu as more likely to result in benefits flowing directly to them. Community closures are also important for articulating and resolving community values and strengthening their management capacity. Here, we describe the evolution of the tengefu movement in Kenya and combine information from focus group discussions, interviews, underwater surveys and boundary marking to evaluate the current status, opportunities and challenges facing these tengefu. We show that in some cases community closures suffer from slow and incomplete national and local legislative processes, challenges to compliance, and weak management.     

Novel Electrically Stimulated Catalytic Converter Prototype for Replacement of Conventional Auto Exhaust Emission Converters

High voltage electrostatics and corona discharge are utilized for various applications in pollution and environmental control. The traditional applications have many flaws due to improper construction of electrode design and assembly that cause system failure, in particular when electrically stimulated devices are exposed to high humidity. A new innovative-patented design by Hamade, electrically stimulated catalytic converter(ESCC),eliminates such flaws and shows the wide practical applications of the new design. The new design utilized previous patented designs and work of the same inventor but retrofitted for catalytic auto exhaust emission control. The current and previous patents include: employing electrically stimulated filtration(ESF) to replace high efficiency particulate air(HEPA) filters, treatment of biological and infectious diseases, electret fabrication, and, most notably, the invention of a new electrically stimulated catalytic converter(ESCC). The electrically stimulated catalytic converter invention includes an exhaust conduit fed from the engine exhaust port with a housed corona charger apparatus. The opposite end is opened to the atmosphere outside of the vehicle or connected to a reduced-size catalytic converter. The corona charger is intrusively or non-intrusively associated with a main flow path defined by the exhaust conduit. The corona charger includes at least one electrode, which may be recessed away from, the main flow path. A plurality of corona chargers may be used in various combinations, optimally a two dimensional grid. The electrically stimulated catalytic converter is adapted to treat and eliminate auto exhaust pollution emission to air.     

Visualisation of uncertainty in probabilistic traffic models for policy and operations

This study investigates different methods to visualise uncertainty in static representations of probabilistic traffic models predictions on road-networks. Although various graphical cues may be used to represent uncertainty it is not a priori clear which of them are most suited for this purpose, since their legibility, intelligibility and the degree to which they interfere with other graphical elements in a representation differ widely. Several graphical uncertainty representations were therefore developed and analysed in expert sessions. A selection of the initial set of uncertainty visualisations was further evaluated in a cognitive alternative task-switching experiment. The results show that graphical representations are able to convey uncertainty information relatively accurately, while some uncertainty visualisations outperform others. It depends on the model and scenario which representation is most suited for a given application. This paper presents an overview of possible graphic uncertainty representations and the considerations involved when applying them to uncertainty in traffic model visualisations.